Rehvid ja veljed
Nii nagu iga teine maastur, vajab ka Land Rover edukaks liikumiseks korralikku rehvi ja velge. Sellel lehel peatumegi veidi pikemalt nendel teemadel.
Viiteid sellele milliseid velgi ja rehve on tootja aegade jooksul Land Roverile kaasa müünud, leiate meie mudeleid tutvustavalt lehelt.
Nii imelik, kui see ei tundu, siis rehve märgistatakse kolme erineva mõõtesüsteemiga. Meetermõõdustik ( näiteks 235/85R16, tollmõõdustik ( näiteks 31×10,5R15) ja imperiaalmõõdustik (näiteks 7,5R16).
Maasturitele mõeldud rehvidel kasutatakse suuruse märkimisel tihti mõõte ka tollides.
Seda reeglina alates 30″-st.
Arvuta spidomeetri näit sõltuvalt rehvist või konverteeri rehvimõõte meeter ja tollmõõdustiku vahel.!
http://www.tqhq.ee/dir.php?id=62
Lisaks soovitame vaadata:
https://www.youtube.com/watch?feature=player_embedded&v=wA7iAqGcyqg
VELGEDE POLDIVALEMID
MUDEL AASTA PCD OFFSET KESKAVA
Defender 90 84.. 5×165 30-40
Defender 110 83.. 5×165 30-40
Discovery I 89…98 5×165 30-40
Discovery II 98…04 5×120 30-50 70
Discovery 3 04…10
Discovery 4 10..
Freelander 97…06 5×114,3 35-42 64
Freelander II 06.. 5×108 40-50 63,3
Range Rover 1 71…95 5×165 30-40
Range Rover 2 94…02 5×120 30-50 70
Range Rover 3 02.. 5×120 30-50 72,6
Range Rover Sport 05.. 5×120 30-50 72,6
REHVIAABITS
| Kiirusindeks | Suurim kiirus | Koormusindeks | Rehvi piirkoormus (kg) |
| B | 50 | 61 | 257 |
| C | 60 | 62 | 265 |
| D | 65 | 63 | 272 |
| E | 70 | 64 | 280 |
| F | 80 | 65 | 290 |
| H | 90 | 66 | 300 |
| J | 100 | 67 | 307 |
| K | 110 | 68 | 315 |
| L | 120 | 69 | 325 |
| M | 130 | 70 | 335 |
| N | 140 | 71 | 345 |
| P | 150 | 72 | 355 |
| Q | 160 | 73 | 365 |
| R | 170 | 74 | 375 |
| S | 180 | 75 | 387 |
| T | 190 | 76 | 400 |
| U | 200 | 77 | 412 |
| H | 210 | 78 | 425 |
| 79 | 437 | ||
| 80 | 450 | ||
| 81 | 462 | ||
| 82 | 475 | ||
| 83 | 487 | ||
| 84 | 500 |
Land Rover Discovery Tire Fitment Guide
· Fitting is for “Series I” Discoveries only (1989 to 1998).
* Sizes are as per B.F.Goodrich M/T, A/T Trac-Edge (where available) courtesy of BFGoodrich
* Actual modfications required my vary by tire make.
* Non BFG tires uses theoretical data as explained below.
* Some information is unconfirmed. Please e-mail me if you know better: red90 ampersand shaw.ca “Spam blocking, replace ampersand with @ and no spaces”
|
Size |
Width (inches) |
Diameter (inches) |
Tread Width (inches) |
Rev/Mile |
Speed Change (%) |
Basis |
Vehicle Modications Required |
| 205/80R16 | 8.1 | 28.9 | ~6.2 | ~720 | 0 | Theory | None (stock) |
| 235/70R16 | 9.5 | 28.9 | 7.7 | 720 | 0 | M/T | None (stock) |
| 225/75R16 | 8.9 | 29.5 | 7.0 | 705 | 2 | M/T | None |
| 245/70R16 | 9.8 | 29.5 | 8.0 | 705 | 2 | A/T | None |
| 30×9.5R15 | 9.8 | 29.9 | 7.4 | 696 | 3 | M/T | Possible rear fender trimming |
| 215/85R16 | 8.5 | 30.6 | 6.4 | 678 | 6 | Trac | Possible rear fender trimming |
| 245/75R16 | 9.6 | 30.6 | 7.6 | 680 | 6 | M/T | Rear fender trimming (from my car) |
| 31×10.5R15 | 10.9 | 30.5 | 8.2 | 673 | 7 | M/T | Rear fender trimmingPossible steering stops
Spacers needed for spare tire. |
| 7.50R16 | 8.7 | 32.1 | 6.4 | 654 | 10 | Trac | Rear fender trimmingPossible steering stops and bump stop height. |
| 235/85R16 | 9.3 | 32.0 | 7.3 | 650 | 11 | M/T | Rear fender trimmingFront endcap trimming
Steering stops Possible bump stop height. |
| 265/75R16 | 10.7 | 31.7 | 8.4 | 656 | 10 | M/T | Rear fender trimmingFront endcap trimming
Steering stops Possible bump stop height. Spacers needed for spare tire. |
| 255/85R16 | 10.5 | 33.3 | 7.9 | 625 | 15 | M/T | Rear fender trimmingFront endcap trimming
Steering stops Bump stop height. Possible front fender trimming. Spare tire will not fit on stock carrier. |
| 285/75R16 | 11.8 | 33.0 | 8.9 | 630 | 14 | M/T | Rear fender trimmingFront endcap trimming
Steering stops Bump stop height. Front fender trimming. Spare tire will not fit on stock carrier. |
Metric system is based on:
“Width (millimeters)” / “Aspect Ratio (percent)” “R for radial” “Rim Size (inches)”
Diameter (inches) = width / 25.4 * 2 * aspect ratio / 100 + rim size
i.e. for 245/75R16
245 / 25.4 * 2 * 75 / 100 + 16 = 30.47″
Width (inches) = width / 25.4
i.e. for 245/75R16
245 / 25.4 = 9.65″
Tire Sizing Guide
For 16” British Tire Sizes
- All British tire sizes are based on British Standard BS AU 50, 1, 2.1, 1991 (British Standard for Tyres and Wheels)
- Range of tire widths are shown in the standard based on mounting on different width rims.
|
British Size |
Width |
Diameter |
Equivalent Metric Size |
Closest Metric Size |
||
|
Designation |
Width |
Diameter |
||||
|
6.00 – 16 |
6.7 to 7.1 |
28.9 |
175/95R16 |
205/80R16 |
8.1 |
28.9 |
|
235/70R16 |
9.3 |
29.0 |
||||
|
6.50 – 16 |
6.9 to 7.3 |
29.5 |
180/95R16 |
225/75R16 |
8.9 |
29.3 |
|
245/70R16 |
9.6 |
29.5 |
||||
|
7.00 – 16 |
7.8 to 8.3 |
30.6 |
205/90R16 |
215/85R16 |
8.5 |
30.4 |
|
245/75R16 |
9.6 |
30.5 |
||||
|
7.50 – 16 |
8.1 to 8.5 |
31.7 |
210/95R16 |
235/85R16 |
9.3 |
31.7 |
|
265/75R16 |
10.4 |
31.6 |
||||
|
8.25 – 16 |
9.1 |
33.9 |
230/100R16 |
255/85R16 |
10.0 |
33.0 |
|
285/75R16 |
11.2 |
32.8 |
||||
|
9.00 – 16 |
9.9 |
35.4 |
250/100R16 |
315/75/16 |
12.4 |
34.6 |
Metric system is based on:
“Width (millimeters)” / “Aspect Ratio (percent)” “R for radial” “Rim Size (inches)”
Diameter (inches) = width / 25.4 * 2 * aspect ratio / 100 + rim size
i.e. for 245/75R16
245 / 25.4 * 2 * 75 / 100 + 16 = 30.47″
Width (inches) = width / 25.46
i.e. for 245/75R16
245 / 25.4 = 9.65″